Operator's Manual

APPENDIX 5 ALERT LIST
AP-54
430 Other Sensor 30
COM Error
Caution
Data from No.30 other
sensor has been
discontinued for more than
set time.
(Set at installation)
Default: 180 seconds
No.30 other sensor is
turned off, or there is a
problem with network.
Check the connection with
No.30 other sensor and
network.
450 Heading Sensor
Not Available
Warning
Heading data of all
available gyro has been not
available for more than 2
seconds.
Check the connection with
all gyro.
451 Gyro CORR.
Source Change
Caution
Heading sensor used in
system is changed.
-
453 SDME Sensor Not
Available
Warning
Speed data from all
available SDME has been
not available for more than
3 seconds.
Check the connection with
all SDME.
469 WGS84 Not Used Warning
WGS84 is not used for
datum of EPSF or cannot
be acquired.
Acquisition timing: Once in
60 seconds or when
position sensor is changed.
Check the operator's
manual of GPS.
470 Datum Change Caution
Current datum of EPSF is
changed.
Acquisition timing: Once in
60 seconds or when
position sensor is changed.
Check the operator's manu-
al of GPS.
472 Position Source
Change
Warning
Position sensor used in
system (distributed by own
ship's information
management) is changed.
-
473 Heading Source
Change
Warning
Heading sensor used in
system (distributed by own
ship's information
management) is changed.
-
474 COG/SOG Source
Change
Warning
COG/SOG sensor used in
system (distributed by own
ship's information
management) is changed.
-
475 CTW/STW Source
Change
Warning
CTW/STW sensor used in
system (distributed by own
ship's information
management) is changed.
-
485 Depth Limit Alarm
Seabed has been less than
set depth for more than 3
seconds.
Be careful of risk of ground-
ing.
No. Text Default Meaning Remedy