Operator's Manual

AP-1
APPENDIX 1 MENU TREE
Main Menu
MENU
bar
(click)
General
Ship & Route
Parameters
Sensor
(Con’t on next page)
Ship
Parameters
Route
Parameters
Instant
Track
MAX Speed (0.1 to 80 kn, 22.1)
MAX Height (0.0 to 100 m, 16.1)
MAX Draught (0.0 to 50 m, 20.0)
Max R.O.T*
WPT Approach*
WPT Prewarning*
Default Line Radius (0.1 to 3.0 NM, 0.8)
Default CH Limit (10 to 1852 m, 185)
Default Safety Margin (0 to 1000 m, 40)
Delay before Initiating First Turn (30 to 600 sec, 60)
Turn Radius (0.02 to 3.00 NM, 1)
Channel Limit for Track Control (Auto, Manual (10 - 1852m))
Route Check Strictly
System/Local
Select
System
Sensor
Settings
Sensor Type (System Sensor, Local Sensor)
HDG Data Source (Sensors, Manual)
Stabilization Mode ( Bottom, Water)
Sensor Type (GPS, LOG)
Data Source (Sensors, Manual)
SPD
COG/ Data Source (Sensors)
SOG
POSN Data Source (Sensors, Manual)
Local Sensor
Settings
HDG
SPD
COG/ Data Source (Sensors)
SOG
POSN Data Source (Sensors, Manual)
Data Source (Sensors, Manual)
Analog Gyro (No use)
Manual
Gyro Correction
Stabilization Mode ( Bottom, Water)
Sensor Type (GPS, LOG)
Data Source (Sensors, Manual, Reference SPD, Drift)
Other Sensor
Settings
Wind
Depth
Below
Trans.
Temperature (Temperature of water surface)
Water Current (Course and speed of water current)
Speed (kn, m/s)
Reference (APPARENT (relative, ref. to heading), NORTH (true,
ref. to North), THEORETICAL (true, ref. to heading)
(Values for Bow, Mid and Aft)
Other
Sensor
Filter Status (Monitors sensor status and integrity.)
Cost (Input values for Hour, Heavy Fuel Oil,
Diesel Oil)
Fuel Consumption (Input values for Speed,
Heavy Fuel Oil, Diesel Oil)
Navigation Parameters (Show forwarding distances, set at installation.)
TCS (Select the ECDIS unit to control Autopilot.)
Cost
Parameters
* Set at installation