Operator's Manual

26. AUTOPILOT OPERATIONS
26-21
11. The ECDIS stops the Backup Navigator Alarm and resets the contact signal.
Waypoint-related indications in the Route Information box
Note: When you approach the last waypoint, the Alert "652 Last WPT Approach" ap-
pears. If you acknowledge Alert 652 when the Autopilot is in the NAVI mode, the route
steering is automatically stopped and the system shows Alert "665 Auto Pilot Mode
Conflict". Route steering is deactivated until the NAVI mode is selected again at the
Autopilot. To return to the route steering, the ship's heading must be set toward the
next waypoint and the ship must be inside the channel limits. Otherwise, an alert is
given.
The text "GoSEA Appr. En-
abled" or "GoAW Appr. En-
abled" appears in the [Route
Information] box until you ac-
knowledge the Alert "150 Early
Course Change Indication".
When you acknowledge the
waypoint approach alert, the
text "GoSEA Turn Enabled" or
"GoAW Turn Enabled" appears
in the [Route Information] box.
During a turn, the text
"GoSEA Turn" or "GoAW Turn"
appears in the [Route Informa-
tion] box.
㪮㪦㪣
ACK
No ACK
90 sec.
before WOL
30 sec.
before WOL
No ACK
30 sec.
after WOL
(1) ECCI
released
(2) CCI
released
(3) CCA
released
(4) Backup
navigator alarm
released