Operator's Manual

SYSTEM CONFIGURATION
xv
Multiple workstation
EC-3000
PROCESSOR
UNIT
Dashed lines indicate
optional or local supply
equipment.
Serial
interface
Analog
interface
Digital IN
interface
EC-3000
PROCESSOR
UNIT
Switching Hub
HUB-100
Digital OUT
interface
100-115/
220-230 VAC,
1ø, 50/60 Hz
Category of units
All units protected
from the weather.
Sensor Adapter
MC-3000S
Sensor Adapter
MC-3010A
Sensor Adapter
MC-3020D
Sensor Adapter
MC-3030D
IF Signal:
- Serial Interface x2
(IEC 61162-1/2)
- Serial Interface x6
(IEC 61162-1)
- Digital Out x6
(power fail/system fail/
NO x2, NC x2)
- Digital In (ack in)
IF Signal:
(Same as left.)
ECDIS
Control Unit
RCU-024
or
Trackball
Control Unit
RCU-026
ECDIS
Control Unit
RCU-024
or
Trackball
Control Unit
RCU-026
(Max. 2)
ECDIS
Control Unit
RCU-024
or
Trackball
Control Unit
RCU-026
ECDIS
Control Unit
RCU-024
or
Trackball
Control Unit
RCU-026
(Max. 2)
Note: The following monitors are
available with the FMD-3200-BB:
MU-190 FURUNO JH23T12FUD Hatteland
MU-231 FURUNO JH23T14FUD Hatteland
MU-201CE FURUNO HD24T21MMD Hatteland
MU-231CE FURUNO JH26T11MMD Hatteland
JH19T14FUD Hatteland HD26T21MMD Hatteland
JH20T17FUD Hatteland
Model Maker Model Maker
MU-190 1.0138 JH23T12FUD 1.0138
MU-231 1.0138 JH23T14FUD 1.0138
MU-201CE 1.0759 HD24T21MMD 0.9517
MU-231CE 1.0138 JH26T11MMD 0.9879
JH19T14FUD 1.0138 HD26T21MMD 0.9879
JH20T17FUD 0.8793
Model Viewing Dist.
Model
Viewing Dist.
* Monitor viewing distance (m):
Gateway network
equipment
(radar, ECDIS, etc.)
Intelligent Hub
HUB-3000
100-115/
220-230 VAC,
1ø, 50/60 Hz
100-115/
220-230 VAC,
1ø, 50/60 Hz
Main Monitor
Monitor Unit
MU-190
MU-231
HD26T21-MMD-MA4-FAGA
Conning
Monitor
Monitor Unit
MU-190
MU-231
Sub Monitor
Monitor Unit
MU-190
MU-231
Main Monitor Sub Monitor
Conning
Monitor
Monitor Unit
MU-190
MU-231
Monitor Unit
MU-190
MU-231
HD26T21-MMD-MA4-FAGA
Monitor Unit
MU-190
MU-231
For information about a Hatteland monitor, see its
Operator’s Manual.