SONAR User Manual
Table Of Contents
- SAFETY INSTRUCTIONS
- TABLE OF CONTENTS
- FOREWORDa
- SYSTEM CONFIGURATION
- 1. OPERATIONAL OVERVIEW
- 2. HORIZONTAL MODE
- 2.1 Operational Overview
- 2.2 Typical Horizontal Mode Display
- 2.3 Selecting the Range
- 2.4 Selecting Sector Width
- 2.5 Selecting Train Center
- 2.6 Selecting the Tilt Angle
- 2.7 Selecting the Training Speed
- 2.8 Finding Echo Position with the Cursor
- 2.9 Event Marker
- 2.10 Depth and Horizontal Range Markers
- 2.11 Adjusting the Picture
- 2.12 Target Lock
- 2.13 Horizontal Menu Overview
- 2.14 Interpreting the Horizontal Display
- 3. VERTICAL FAN MODE
- 3.1 Operational Overview
- 3.2 Typical Vertical Fan Mode Display
- 3.3 Selecting the Range
- 3.4 Selecting Train Center
- 3.5 Selecting Display Sector
- 3.6 Selecting Sector Center
- 3.7 Selecting the Training Speed
- 3.8 Finding Echo Position with the Cursor
- 3.9 Event Marker
- 3.10 Depth and Horizontal Range Markers
- 3.11 Adjusting the Picture
- 3.12 Vertical Menu Overview
- 3.13 Interpreting the Vertical Fan Display
- 4. ECHO SOUNDER MODE
- 5. MENU OPERATION
- 6. MAINTENANCE, TROUBLESHOOTING
- MENU TREE
- SPECIFICATIONS
- INDEX
2-21
2.13 Horizontal Menu Overview
This section presents an overview of the items on the HORZ menu.
1. Press the [MENU] key to open the menu.
2. Press
to select MENU and then press or to select the HORZ menu.
TVG LEVEL 4.0
TVG DISTANCE 4.0
GAIN ADJUST 0
RES. COLOR LOG
CLUTTER 0
TARGET KEY REVERSE
: SELECT
: CHANGE MENU: END
MENU
COM1 VERT ES PRESET SYSCOM2 HORZ
LOCK MODE AUTO
AUTO TILT OFF
Figure 2-19 HORZ menu
3. Press
or to select item desired.
4. Press
to show corresponding dialog box.
5. Press
or to select option desired.
6. Press the [MENU] key to register your selection and close the menu.
2.13.1 Horizontal menu description
TVG LEVEL: Compensates for propagation loss of sound in water. Default setting is 4.0. For
further details, see paragraph 2.11.3 on page 2-13.
TVG DISTANCE: As above. Default setting is 4.0.
GAIN ADJUST: Compensates for too weak or too strong echo level. Adjust it when the gain on
the horizontal mode when it is not the same as that on the vertical fan and echosounder modes.
Setting range: -10 to +10. Default setting is 0.