Back OPERATOR'S MANUAL GPS RECEIVER MODEL GP-320B www.furuno.co.
IMPORTANT NOTICES General • The operator of this equipment must read and follow the descriptions in this manual. Wrong operation or maintenance can cancel the warranty or cause injury. • Do not copy any part of this manual without written permission from FURUNO. • If this manual is lost or worn, contact your dealer about replacement. • The contents of this manual and equipment specifications can change without notice.
SAFETY INSTRUCTIONS CAUTION NOTICE Confirm that the power supply voltage is compatible with the voltage rating of the equipment. No one navigation device should ever be solely relied upon for the navigation of a vessel. Connection to the wrong power supply can cause fire or damage the equipment. Always confirm position against all available aids to navigation, for safety of vessel and crew.
TABLE OF CONTENTS SYSTEM OVERVIEW........................................................................................... iv EQUIPMENT LISTS ............................................................................................. vi 1. MOUNTING ....................................................................................................... 1 2. WIRING ............................................................................................................. 2 3. DEFAULT SETTINGS ...........
SYSTEM OVERVIEW The GP-320B is a GPS receiver with WAAS (Wide Area Augmentation System) capability. WAAS, available in North America, is a provider in the worldwide SBAS (Satellite Based Augmentation System) navigation system. CBAS provides GPS signal corrections to SBAS users, for even better position accuracy, typically better than three meters.
NavNet Series Model 1722C Model 1722 Model 1732C Model 1732 Model 1742C Model 1742 Model 1752C Model 1752 Model 1762C Model 1762 Model 1833C Model 1933C Model 1943C Model 1833 Model 1933 Model 1943 Model 1953C GD-1900C GD-1700C GD-1700 Multi Display RD-30* Echo Sounder LS-6100 * = WAAS is inoperative. Other Equipment* GD-XXXX GR-80 Ship's Mains (12-24 VDC) JUNCTION BOX This GPS receiver complies with Canadian standard RSS-210 (Low Power License-Exempt Radio communication Devices).
EQUIPMENT LISTS Standard supply Name GPS Receiver Type GP-320B Code No. Qty Remarks ⎯ 1 With 10 m cable Code No. Qty Remarks Optional equipment Name Cable Assembly Type MJ-A7SPF/SRMD-100 000-144-534 Mast Mounting Kit CP20-01111 Right Angle Antenna Base L-angle Antenna Base Handrail-mount Antenna Base 1 004-365-780 1 NO.13-QA330 000-803-239 1 NO.13-QA310 000-803-240 1 NO.
1. MOUNTING NOTICE Do not apply paint, anti-corrosive sealant or contact spray to coating or plastic parts of the equipment. Those items contain organic solvents that can damage coating and plastic parts, especially plastic connectors. Mounting considerations Follow the guidelines below to choose a suitable mounting location for the antenna unit.
2. WIRING This unit outputs position and speed to external equipment. NavNet equipment, Multi Display RD-30 and Echo Sounder LS-6100 can be connected directly. For connection to other equipment, use a junction box (local supply) which has seven terminals. The antenna cable is 10 meters long. If the distance between the antenna unit and the display monitor is more than 10 meters, use the optional cable assy. (10 m). Up to four extension cables can be connected serially.
Connecting to Multi Display RD-30 WAAS is not operative in this installation.
Connecting to other equipment Remove the connector from the antenna cable and attach crimp-on lugs or similar terminals to the cable’s cores. Connect the cores to the junction box as below. Antenna Cable 10 m *1: RS-422 signal can be received by using current loop. JUNCTION BOX YELLOW GREEN WHITE BLUE RED BLACK Drain Wire non-NavNet equipment 3 RD-A RS-422*1 input for radar/plotter 4 RD-B NMEA 0183 Ver. 2.0 1 TD-A Correction data from GR-80 2 TD-B output in RS-422 format Fuse 0.
Output/Input data sentences Priority High ↑ Input Data Output Data GPDTM GPGGA XXGGA GPS position status (time of fix, latitude, longitude, receive status, satellite used) XXZDA UTC date (time in GPZDA minutes and seconds, day, month, year, time) XXGLL Position (latitude, GPGLL longitude) GPVTG ↓ Low XXRMC Navigation data GPRMC (UTC time and latitude, longitude, ground speed, true course, year, month, day) Geometric datum GPS fix data Settable Output Cycle Yes Yes Default Output UTC time and date
3. DEFAULT SETTINGS Setting Initial Latitude/Longitude G Date, Time P Antenna Height S Almanac Data Ephemeris Data Local Zone Time R PDOP E Geometric Datum C Mask Elevation E Disable Satellite I Smoothing Coefficient V E Dynamic Coefficient R Data Output (Cycle) DGPS Setting Parameter W GEO Satellite, Provider ID A WAAS Availability A Type 0 Message S Default setting North=34°44.0000, East=135°21.
4. TROUBLESHOOTING, BATTERY Troubleshooting If the message “No position data” appears on the display of NavNet equipment, there may be a problem with the GPS receiver. Turn off the power and then check the following points: 1) Check for objects around the antenna which may interfere with reception. 2) Check that the antenna cable is firmly fastened. 3) If extension cable(s) are used, check for water leakage at junction point(s). 4) Check the antenna cable for damage. 5) Check the antenna for damage.
SPECIFICATIONS OF THE GPS RECEIVER GP-320B 1. GENERAL 1.1 Receiving Channels GPS 12 channels parallel, 12 satellites tracking WAAS 1 channel 1.2 Rx Frequency 1575.42 MHz 1.3 Rx Code C/A code, WAAS 1.4 Position Fixing System All in view, 8-state Kalman filter 1.5 Position Accuracy GPS 10 m (95% of the time, HDOP 4) DGPS 5 m (95% of the time, external data required) WAAS 3 m (95% of the time) 1.6 Tracking Velocity 999 kt 1.7 Position-fixing Time Warm start: 12 s approx.
ＰＡＣＫＩＮＧ ＬＩＳＴ 20AW-X-9852 -1 GP-320B（E) A-1 N A M E ユニット 1/1 O U T L I N E DESCRIPTION/CODE № Q'TY UNIT GPS受信機 1 GP-320B(E) GPS RECEIVER 004-367-500-00 図書 DOCUMENT 取扱説明書 OPERATOR'S MANUAL 1 OME-44220-* 000-809-291-1* 型式/ｺｰﾄﾞ番号が２段の場合、下段より上段に代わる過渡期品であり、どちらかが入っています。 なお、品質は変わりません。 TWO TYPES AND CODES MAY BE LISTED FOR AN ITEM. THE LOWER PRODUCT MAY BE SHIPPED IN PLACE OF THE UPPER PRODUCT. QUALITY IS THE SAME. （略図の寸法は、参考値です。 DIMENSIONS IN DRAWING FOR REFERENCE ONLY.
D-1 Sep.
The paper used in this manual is elemental chlorine free. ・FURUNO Authorized Distributor/Dealer 9-52 Ashihara-cho, Nishinomiya, 662-8580, JAPAN Telephone : +81-(0)798-65-2111 Fax : +81-(0)798-65-4200 All rights reserved. Printed in Japan A : APR . 2002 B2 : JAN . 13, 2011 Pub. No.
