User's Manual

Let the power of MAX bring your chart plotter to life!
Perspective View
Ideal when entering unfamiliar harbors. A
perspective or “bird’s eye view” of the chart
may be selected by using the MODE hot
key. Note: Perspective View must be turned
on in the CHART CONFIGURATION menu.
Mode also offers North Up, Course Up and
Perspective options for chart orientation.
Grounding Alarm
When activated, a “search light” alarm
area will lookout in advance of the boat
and check chart data for depth and land
area obstructions. An audible alarm sounds
and a dialog box appears on the screen if
your boat is in danger. Set the safe draught
for your boat and ground alarm range
dependent on boat speed (.5nm is typical). ALARM key > Next Page >
Grounding Alarm > ENTER > ON > Set Depth > ENTER.
Grounding Alarm Range > ENTER > Set Range > ENTER.
C-Marina Charts
Many marinas have highly detailed
drawings showing docks and facility
information. To locate, turn the
Chart Boundaries ON in the CHART
CONFIGURATION menu. A small chart
boundary will be shown around the area of
the marina.
In order to demonstrate the following MAX features, the unit should have
a GPS fix or be in simulation mode. To enable the simulation mode go to:
MENU > SYSTEM CONFIGURATION > SYSTEM SET UP > SIMULATION.
Enter Lat and Long to position vessel. Enter speed and heading if desired.
jeppesen.com/lightmarine
Streets, Roads and Points of
Interest (POIs)
Coastal roads, land elevations and Points
of Interest for getting around an unfamiliar
harbor easier.
Safe Route Check
This feature monitors the chart data ahead as a route is planned or
selected, ensuring that the planned track does not cross potential chart
hazards. A report is displayed detailing hazards in each leg of the route.
MENU > PLOTTER SETUP > SAFE ROUTE CHECK > ON.
Safety Status Bar
This menu bar automatically displays any safety related warning.
MENU > CHART SETUP > CHART CONFIGURATION > SAFETY STATUS > ON.
Embedded Photos
View photo images of inlets, marinas,
harbors, lighthouses and other POIs. Move
the cursor over a camera icon, press the
knob for ENTER > Multimedia Content
will be highlighted, select IMAGE using
the hot key. For full screen image >
ENTER.
Tide Stations
Place your cursor on a T icon and hit ENTER, then ENTER again to bring
up the tidal graph. Press DATE to change to a different date. Search
for other near by Tide Stations by pressing ENTER > FIND, scroll to Tide
Stations, > ENTER.
Port Services
Huge database of different marine services
such as: Fuel Stations, SeaTow locations,
Sail Maker (for repairs) and local Harbor
Masters. Toggle through to find a load
of helpful information. Place cursor over
PORT icon > ENTER > FIND > scroll to Port
Service > ENTER.
Flashing NavAids
This setting will bring your NavAids to life.
When turned ON, the NavAids will flash
on the chart based on their signal and
period, as long as your GPS fix is within
the specified visibility of the range of the
NavAids. MENU > CHART SETUP > CHART
CONFIG. > LIGHT SECTORS > FLASHING.
Dynamic Currents
Place cursor on any current arrow vector
and a dialog box opens giving speed,
velocity, date and time of current. The
current vectors automatically change
direction and color based on time and
current flow.
Current Predictions > With the cursor on
the vector, press the knob for ENTER. You
may now use the hot keys to set a specific time or advance/decrease the
time in one hour increments.