User's Manual

Trouble Shooting
Monitor will not turn on Ensure power cord is connected to the
display correctly
Make sure the cigarette socket has power
output of 12 - 14V DC
Check fuse in cigarette socket adapter
Camera and display Check if camera unit is recieving power
will not pair
Reduce the distance between camera and
monitor while pairing
Ensure to hold the pairing button on the
camera for 2 seconds
This icon flashes on Check antenna is installed correctly on
the display: camera unit. Ensure it faces vertically.
(intermittent / weak
signal) Distance between camera and display is
too great.
Delete camera from LCD display memory
then re pair camera to display
System testing:
1. Disconnect and reattach the vehicle’s negative battery cable.
2. Turn the ignition key to the accessory position, do not start the vehicle.
3. Engage the parking brake, and then put the shifter in the reverse
position. This will engage the camera unit and picture will be displayed.
4. After testing the unit and you are satisfied with the route you have chosen
for the cabling, you must permanently install it.
5. Route all wires behind interior panels or under carpeting so they are hidden.
13