User Manual

23
TV Settings
Picture Settings
1. Press MENU button, the setup window will appear on the screen.
2. Use or to highlight Picture mode.
3. Use or to highlight the item you would like to reset, then press or to select the settings.
4. Press MENU to return to the previous menu or press EXIT at any time to exit the setting.
Picture Menu
Picture Mode
Select the display mode
Press or to select User / Standard / Dynamic / Mild.
Contrast
Control the contrast level of the
picture
Press or to increase or decrease contrast intensity.
* Only adjustable after set “Picture Mode” as “User” mode
Brightness
Control the brightness level of the
picture
Press or to increase or decrease the overall brightness.
* Only adjustable after set “Picture Mode” as “User” mode
Color
Control the color level of the picture
Press or to increase or decrease the color intensity.
* Only adjustable after set “Picture Mode” as “User” mode
Tint
Control picture tint
Press or to adjust colors toward green or reddish tint.
* Only adjustable under NTSC signal
Sharpness
Control the sharpness of the picture
Press or to soften or enhance edges in the picture.
* Only adjustable after set “Picture Mode” as “User” mode
Color Temp
Select the color mode
Press or to select Medium / Warm / Cool.
Backlight
Control the backlight
Press or to increase or decrease the backlight.
Blue Screen
If this is set as On, the screen changes
to blue when no signal input.
Press or to set as On or Off.
Advanced
Setting
Press to enter sub-menu to set the
features in right column.
Aspect Ratio
Press or to select Wide /
Normal/Cinema/ Zoom.
Noise Reduction
Press or to select Off /
.
Dynamic Contrast
Press or to set as On or Off.
HDMI mode
Press or to set as Video.
Auto Brightness
Press or to set as On or Off.
HDR Select the HDR mode
Press or to select Middle, Strong or Weak setting.