Owner's Manual

22
TV Settings
Setup Menu
HDMI CEC
Press to enter
sub-menu, then
press or to
select Off /On for
HDMI CEC.
When selecting
On, the sub-menu
in the right column
will be available to
set up.
Auto Standby
Press or to select Off /On.
In On mode, TV will shut down when there is no signal for
several minutes.
Auto TV on
Press or to select Off /On.
In On mode, TV will automatically turn on when the connected
CEC device is turned on.
HDMI ARC
Press or to select Off /On.
Set the HDMI ARC On if you want to enable the ARC function
with a connected 5.1/7.1 Home Theater System.
Device control
Press or to select Off /On.
In On mode, it allows a connected CEC device to be
controlled by TV remote control.
Device list
Press to display a list of HDMI CEC devices currently
connected to the TV.
EDID Switch
Select the EDID
version.
Press or to select Auto, EDID 1.4 or EDID 2.0.
Restore
Default
Reset to factory
default settings.
Press or to select Yes or No.
NOTE: HDMI CEC function is only available when connecting with a CEC device.