Owner's Manual

Ɣ To reduce risk of damage to the adapter cables and charging
ports, pull cables by the plug end when disconnecting the
power station. Do not operate the power station with damaged
adapter cables.
Ɣ Do not drop or subject the product to strong mechanical shock.
Ɣ Do not expose the product to moisture, water, rain, snow, or spray.
Ɣ Keep the product clean and dry. Unplug the product before
cleaning. Use a clean dry cloth to clean battery or power station
terminals if they become dirty.
Ɣ Do not allow foreign objects or conductive materials such
as keys or fingers to come in contact with the positive and
negative terminals on the battery or power station. Doing so
may cause a short circuit.
Ɣ Always unplug charging cables from power station prior to
removing battery.
Ɣ Ensure that battery is fully inserted in power station and
charging cords are connected properly before attempting to
charge or discharge.
Ɣ Do not expose the product to excessive heat or fire above 158°F
(70°C) and avoid storage in direct sunlight.
Ɣ The product may become warm, up to 104°F (40°C), during
extended high-power operation. During operation, keep the
product away from materials that may be affected by these
temperatures.
Ɣ Disconnect the ePod from power source after more than 48
hours when not in use.
Ɣ Do not allow the ePod or any other connected devices exceed
the rated current, voltage, or power indicated in this manual and
at the AC/DC ports.
Ɣ Dispose of battery in accordance with local regulation. Contact
your local waste management office for information on proper
battery recycling or disposal.
Ɣ The product must be stored indoors and protected from the
elements.
Ɣ Do not block the air vents of the product. Keep a clearance of at
least 1” (2.5cm) on the left and right side.