Owner's Manual

• Slide a wheel to the axle.
• Place a washer on the axle. Push the washer onto the wheel.
• Push the straight end of the retention pin through the axlels hole.
~ ~ =.,.. ~•if>'. ~·. ·,,
·,/ ' . ·~ -,~ "': ~ ~
_~;:#:~::;_s,,;-,.:,, i., - •• , -~ ~~- J \, ;
\\ - .,~~¥;J/' ?5• J >.. '--,.",,,, v ', ,..
-~ -• , ;:~~-~ :, \ ! "" .. ," '
- ,, '
'I --~~- .... r-~:-,,_ · '--,~ ____ .:/:
~ ,, . -~~:.. .... ·--:.:•" . . ~------ ·· ..... - ~
" ..... ,........ . ...... -·
~ .... - ..... ,, .. - '
---
~ --~~-=--- ;
t
;&,~~
• Assemble the wheel cap onto the wheel: Align the catches with the holes on the
wheel and push the wheel cap in.
• Repeat the above steps to assemble the second wheel on the other side.
• The assembly of the wheel kit is completed.