Owner's Manual

BEFORE FIRST USE
Remove all packaging materials.
Check the completeness
of
the delivery.
Check the appliance for transport damages.
Before starting your new cooler for the first time, clean it with a damp cloth. Do not use soap
or
detergent.
APPLIANCE PLACEMENT
Make certain at least 1"(25.4mm) clearance exists to the air vents, and never block vents.
Operate the unit on a flat surface (slope of no more than 30°).
Place the unit
in
a
dry
and ventilated place far away from heat sources (such as stove, open
fire), and place the unit
in
a well shaded area (prevent exposure to direct sunlight).
Do not immerse the unit
in
water
or
expose it
to
rain.
POWER THE COOLER
Power with
120V
AC/
12V DC Power Source
:::,;::
NOTE: The
AC/DC
adapter is for indoor use only. Do
not
use it outdoors.
Power with Furrion ePod™ Battery (Sold Separately)
You
can purchase a Furrion ePod™ battery
to
power your
coo
l
er
in
off-grid situations.
Plug in
the
Furrion ePod™
battery
The
cooler
display will indicate the actual battery level when the Furrion ePod™ battery is
correctly inserted into the compartment.
~
tr.--=--.
tr
Remove screws
and
cover Insert screw plugs
Plug
in battery
NOTE: Keep the
dry
storage and Furrion ePod™ battery compartment closed when camping.
Charge
the
ePod™
battery
NOTE: The solar panel cannot power the Cooler
without
a Furrion ePodbattery inserted
(Unit shows
"SOL")
.
-
///~s
rrg.
-.::::..::::i
F
"'c::=;::.:ir;..---,r;;::
::,.....-.
or
i
~-,
I~