Owner's Manual

English
11
2. Rotate the 4 serving tray locks 90° to release and take out
the Serving Tray. (Fig. 21)
Fig. 21
NOTE: When placing the serving tray back, make sure the
"FURRION" side faces outward. Otherwise the serving tray
will not seat properly.
3. Unfold the Serving Tray to its fully extended position.
(Fig. 22)
Unfold 180°
Fig. 22
4. Place the Serving Tray on the extended handle. (Fig. 23)
Fig. 23
NOTE: Do not place more than 5lbs (2.27kg) weight onto the
serving tray.
Drain Cap (Fig. 24)
Drain Cap
Fig. 24
● Located at the bottom of the cooling compartment side.
● Rotate the cap to take it off, the water in the cooling
compartment can be drained.
Accessory Rail (Fig. 25)
Dual Cup Holder
(3”(76mm) diameter
openings)
Umbrella Holder
(2’’(51mm) diameter
opening)
Bottle Opener
Fig. 25
● Installed on both sides of the cooler.
● Dual cup holder, umbrella holder and other accessories
can be quickly and conveniently attached and detached
from the accessory rail.
Bottle Opener
● The Bottle Opener is installed on the accessory rail.
● Heavy duty construction for durability.
Dual Cup Holder
● Able to be quickly attached to & detached from the
accessory rail.
● Two 3” (76mm) wide openings to fit several beverage
sizes (tumblers, cans, water bottles, 12 oz beer bottles).
Umbrella Holder
● Able to be quickly attached to & detached from cooler
accessory rail.
● Can accept beach umbrella of which handle up to 2''
diameter. The pole should insert into the sand ground for
at least 5'' (127 mm).
● Additional use for fishing poles, flag poles up to 2''
diameter.