Owner's Manual

7
Installation
Fig. 7
9. Follow the wiring guidelines below to
connect the cables of TV/FM antenna
(black) and FM/AM antenna (white)
from the interior of the RV ceiling.
See “Wiring Diagram” section for
detail.
− TV/FM antenna (Black) with
extension cable to DC powered
wall-plate.
− FM/AM antenna (White) to audio
system.
Using the Existing Opening
1. Unscrew and remove the old TV
antenna from the RV rooftop.
2. Remove all caulking compound
around the opening.
3. Insert the bottom collar of the TV
antenna wing into the center hole of
the antenna base.
NOTE: Make sure the rubber seal
on top of the LTE antenna base is in
location. (Fig. 8)
Collar
Rubber seal
Fig. 8
4. Fix the TV antenna wing in the base
using the two 4 x 12mm square
socket pan head tapping screws
provided with the product. (Fig.9)
Fig. 9
5. Following the guidelines below to
connect the cables of TV/FM antenna
(black) and FM/AM antenna (white)
from the interior of the RV ceiling.
See “Wiring Diagram” section for
detail.
− TV/FM antenna (Black) with
extension cable to DC powered
wall-plate.
− FM/AM antenna (White) to audio
system.
6. Thread the cables of the antenna
base through the opening. (Fig. 10)
NOTE: Make sure the middle circle
of the LTE antenna is center aligned