Owner's Manual

9
Installation
− LTE Antennas: Connect to the
rooftop unit by mapping the same
wire color.
− Power Wires: Connect to the RV
+12Vdc (current rating >1A) power
source. Red is power wire, Black
is ground wire.
− Network Wires: Connect to the
network interface in the RV.
Fig. 14
LTE Antenna
Network Wires
Power Wires
3. Cover the base of the ceiling mount
bracket over the cutout area and
secure with eight stainless steel self-
tapping screws (not supplied).
(Fig. 15)
Fig. 15
4. Place back the top cover to the ceiling
mount bracket. (Fig. 16)
Vehicle Roof
Fig. 16
Mounting the Wall Plate
The wall plate may be flush-mounted in
most standard electrical boxes.
1. Select a suitable location that is not
susceptible to moisture.
2. Mark and cut a hole in the RV wall.
3. Connect the antenna cables to the
wall plate. See ‘Wiring Diagram’ for
detail info.
4. Fix the wall plate in the wall using
2stainless steel self-tapping screws
(not included).
NOTE: The wall plate is sold separately,
please contact the dealer for detail.