ASSEMBLY INSTRUCTIONS VERSION # 21-12-13 less soe oy | Phillips Screwdriver {Not Inclined) 2 People Recommended 000.0 EASY weren't DIFFICULT The Assembly Rating is a S-point system showing the feel of effort needed to assemble a specific product.
CHECK BEFORE STARTING Are you missing anything? Double-check all parts, hardware and accessories listed are all accounted for. Should we send any replacements? Are there any irregularities or flaws in the parts? We can send replacements! Check out our Quick Tips! We recommend reviewing the per-assembly handouts. Even experts need a refresher now and then! Prep Time! Please review the assembly instructions and all diagrams prior to assembling.
PRE ASSEMBLY INTRODUCTION We understand building ready-to-assemble furniture can be a challenging experience for some. To help avoid confusion, we have provided some helpful tips that may speed up the process. Teamwork ALWAYS have at least two people to help with transporting and assembling the product to avoid potential injury and/or damage. Suitable Location Assembling near the area of the intended location is highly recommended.
ASSEMBLY AND CARE ADVICE A FAILURE TO FOLLOW THE GUIDELINES BELOW MAY RESULT IN INJURY AND/OR PROPERTY DAMAGE. Turn clockwise to tighten and only tighten when step is completed or when instructed to do so. Position each part correctly and insert screws or bolts into their respective holes. Use the appropriate hand tools or power tools for assembly. Select steps, such as tightening screws and/or bolts, may require hand tools to avoid causing damage during assembly.
CAM LOCK FASTENER ASSEMBLY INSTRUCTIONS Q Note : > D Every cam lack bolt must have a cam Cg, lock connector in order to fasten the parts together. cam bolt cam lock screwdriver No Screw the cam Insert the cam bolt inch the bolt into panel. bolt hole of joint panel. Align the cam lock with its side opening Turn the cam lock clockwise gently (or arrow) pointing fo cam bolt. until it will not turn any more.
ASSEMBLY INSTRUCTIONS 1 Hardware (1) PCs Hardware (3) PCs Apply a dab of glue into dowel holes of panels before inserting dowels (43) 87/17
ASSEMBLY INSTRUCTIONS 2 Hardware (3) PCs Hardware (3) PCs Apply a dab of glue inch dowel holes of panels before inserting dowels (#3) 8/17
ASSEMBLY INSTRUCTIONS 3 Part §@ x1PC Part £ PCs Part § x1PC Hardware (8) PCs Accessory (Ad) x1PC Front Top Gaea Recommend using a power 100 to only tighten hardware (#5) faster Accessory (#A4) could also quark far hardware (#5) if a power toot is not present.
ASSEMBLY INSTRUCTIONS 5 Part @ x1PC Hardware &) PCs Front ® Recommend using a power 100 to only tighten hardware [#5] faster Accessory (#44) could also work for hardware (85) ifa power tool is not present 6 = Part £3 x1PC Part @ x1PC Hardware (2) PCs “a Front 11/17
ASSEMBLY INSTRUCTIONS 7 Part €@ PCs Part £8 x1PC Part § x1PC Hardware (5) PCs Hardware (8) PCs Hardware (3) PCs Accessory (Ad) x1PC Recommend using a power attn to ably tighten hardware (#5} faster, Accessory (#A4) could also quark for hardware (#5) if a power toot is nat present
ASSEMBLY INSTRUCTIONS 8 Hardware (7) PCs Front Top Accessory (AZ) XEmacs Part @ x1PC Part § PCs we recommend using the 12.2" mark hole. For Ad sized documents we recommend using the 13° mark hole. Note: Length of files can be selected.
ASSEMBLY INSTRUCTIONS 11 Hardware (8) PCs Fully extend drawer rails then | align the rails estimate hole to i the drawer slide panel's holes.
ASSEMBLY INSTRUCTIONS 13 Accessory xi PC Accessory (A7)x1PC Accessory (Ag) sextet Top Front For satiety, please secure anti onto wall by using wall mounted straps provided. to page 17 on Walt Keep this handy! Please retain his instruction manual and any order related information for future reference. Lift, don’t drag! To avoid damage to product please sways LIFT the product when transporting of adjusting the placement.
ASSEMBLY INSTRUCTIONS Wall Mounting and Fixing == EXPANSION WALL ANCHOR Our provided expansion wall anchors are only suitable for masonry walls, such as drywall, plaster or concrete, and are best for holding lightweight items or for anti-tip prevention. If you are unsure of the correct wall anchor to use with the product, please request professional guidance. liability for product damage or failure due to using the incorrect anchors will fall on the installer.
