ASSEMBLY INSTRUCTIONS VERSION # 19-11-08 TOOLS REQUIRED Hammer {Mat Included) Philips Screwdriver (Not Included) Recommended EASY wie HEF CULT The Assembly Rating is a 5-punt system showing the level of effort needed to assemble a specific product.
CHECK BEFORE STARTING Are you missing anything? Double-check ail parts, hardware and accessories sifted on Page 6 are accounted for. Should we send any replacements? Ave there any irregularities or flaws in the pairs? We can send replacements! Check out our Quick Tips! We recommend reviewing the per-assembily handouts. Even experts need a refresher now and then! Prep Time! Please review the assembly instructions and all diagrams prior to assembling.
PRE ASSEMBLY INTRODUCTION We understand building ready-to-brasserie furniture can be a challenging experience for some. To help avoid confusion, we have provided some helpful dips that may speed up the process. Teamwork ALWAYS have at least two people to help with transporting and assembling the product to avoid potential injury and/or damage.
ASSEMBLY AND CARE ADVICE A FAILURE TO FOLLOW THE GUIDELINES BELOW MAY RESULT IN INJURY AND/OR PROPERTY DAMAGE. Position each part correctly and insert screws or bolts into their respective holes. Tum clockwise to tighten and only tighten when step is completed or when instructed fo do so. Use the appropriate hand tools or power tools for assembly.
ASSEMBLY INSTRUCTIONS 1 Part Part @ x 1PC Part Hardware (1) x 2 PCS Hardware (3) x 2 PCS Hardware (8) x 2 PCS Hardware (8) x 2 PCS Hardware x 2 PCS Hardware @@ x 2 PCS Hardware Align bolts (#3) with half moon washer (#8) (0 the designated holes as shown in the diagram, then secure.
ASSEMBLY INSTRUCTIONS 2 Hardware (7) x 8 PCS Hardware {2 x 2 PCS Hardware x 4 PCS Align bracket {#12} to the headboard then secure by using screws (#7) and bolts Make sure bolts (#4) is haf way secured while screws {#7) is fully lightening.
ASSEMBLY INSTRUCTIONS 3 Part @ยง x1 PC Hardware (7) x 8 POS Hardware 2 x 2 PCS Hardware (3) x 4 PCS Align bracket {#12) to the foot board then secure by using screws (#7) and bolts Make sure bolts {#4) is half way rad while (#7) is fully lightening 8/13
ASSEMBLY INSTRUCTIONS 4 Part @ x 2 PCS Part x 2 PCS Hardware (7) x 36 PCS 7 ~ Hardware {3 x2 PCS i Align side rails to each other, .
ASSEMBLY INSTRUCTIONS 5 Part x 1PC Part @ x 2 PCS Hardware (2) x 4 PCS Hardware (8) x 4 PCS Top ~ Hardware {3 x 4 PCS (6) y Hardware Shaw i the raged, Mike sue the hole of the farseeing ruts sling io 10/13
ASSEMBLY INSTRUCTIONS Align and hoke the side rails {#00} to the belts then secure and fully tighten bolls 1113
ASSEMBLY INSTRUCTIONS Part x2 PCS Hardware 8) x 20 PCS then secure by using screws Align slats (#H) to the side rails, 12/13
ASSEMBLY INSTRUCTIONS information for feature reference please always LIFT the product Please retain this instruction maniacal and any order related To avoid damage fo product when transporting of adjusting the placement (Keep this handy! (& Lif, don't drag! 13/13
