ASSEMBLY INSTRUCTIONS VERSION # 21-04-30 TOOLS REQUIRED — Allen Wrench (Included) 2 People Recommended EASY meme DIFFICULT The Assembly Rating is a 5-point system showing the revel of effort needed fo assemble a specific product.
CHECK BEFORE STARTING Are you missing anything? Double-check aff pairs, hardware and accessories cited on Page Save accounted for. Should we send any replacements? Threadbare any regularities or flaws in the parts? We can send replacements! Check out our Quick Tips! We recommend reviewing the per-assembly handouts. Even experts dean a refresher now and then! Prep Time! Please review the assembly instructions and all diagrams prior to assembling.
PRE ASSEMBLY INTRODUCTION We understand building ready-to-assembler furniture can be a challenging experience for some. To help avoid confusion, we have provided some helpful {ips that may speed up the process. Teamwork ALWAYS have at leas! two people to help with transporting and assembling the product 1 avoid potential injury and/or damage. Suitable Location Assembling near the area of the intended location is highly recommended.
ASSEMBLY AND CARE ADVICE A FAILURE TO FOLLOW THE GUIDELINES BELOW MAY RESULT IN INJURY AND/OR PROPERTY DAMAGE. \ Turn clockwise to tighten and only tighten when step is completed ar when instructed to do 50. Position each part correctly and insert screws or bolts into their respective holes. Use the appropriate hand tools or power tools for assembly. Select steps, such ag tightening serpents and/or bolts, may require hand tools to avoid causing damage during assembly.
+ Please keep instructions for future reference, » Check the quantity and irregularity of part sand froward before yous @2 Table Top Table Shelf Table Leg 1pc PCs =) => N Bolt @1/4" x 1" Allen Wrench Flat Washer @10/16" PCs am) Bolt @1/4" x 10/16" 5/6
ASSEMBLY INSTRUCTIONS 1 Part #2 x1pc Part #3 dopes Hardware #A; PCs Hardware! Align legs (#3) to the shelf then Hardware #C; PCs secure by using bolts (#A) with washers (HC). PN Align legs to the top then Part #1 xiii secure by using bolts (#D) with Hardware #8: x1pc washers ASSEMBLY COMPLETED Fiasco angular the neuritis rats on an even # and flat surface.
ASSEMBLY INSTRUCTIONS TOOLS REQUIRED Allen Wrench (Included) A 1 People Recommended Em SUCCEED EASY DIFFICULT The Assembly Rating is a 5-punt system showing the {elev of effort needed fo assemble a specific product.
CHECK BEFORE STARTING Are you missing anything? Double-check all parts, hardware and accessories listed on Page 6 are accounted for, Should we send any replacements? Ara there any irregularities or flaws in the pairs? We can send replacements! Check out our Quick Tips! We recommend reviewing the per-assembly handouts. Even experts need a refresher now and then! Prep Time! Please review the assembly instructions and all diagrams prior to assembling.
PRE ASSEMBLY INTRODUCTION We understand building ready-lo-assemble furniture can be a challenging experience for some. To help avoid confusion, we have provided some helpful tips that may speed up the process. Teamwork ALWAYS have at least twa people to help with transporting and assembling the product 1 avoid potential injury and/or damage. Suitable Location Assembling near the area of the intended location is highly recommended.
ASSEMBLY AND CARE ADVICE A FAILURE TO FOLLOW THE GUIDELINES BELOW MAY RESULT IN INJURY AND/OR PROPERTY DAMAGE. \ Turn clockwise to tighten and only tighten when step is completed ar when instructed to do 50. Position each part correctly and insert screws or bolts into their respective holes. Use the appropriate hand tools or power tools for assembly. Select steps, such ag tightening serpents and/or bolts, may require hand tools to avoid causing damage during assembly.
+ Please keep instructions for future reference.
ASSEMBLY INSTRUCTIONS 1 Part #1 x1pc ‘Align chair back (#1) to seal then Part #2 x1pc secure by using bolts (#A} with washers Hardware #A apexes Hardware #8: x1pc Hardware #C: PCs B ASSEMBLY COMPLETED Planning anise the neuritis rats on an even and fiat surface.
