Assembly Instructions ASSEMBLY RATING Tools Required For Assembly: The Assembly Rating is a 5-point system that shows the degree of effort needed in Allen Wrench Se 1) assembling a specific product (with 1 being easy and 5 being difficult). For some Phillips Screwdriver products, two persons are recommended.
ASSEMBLY & CARE ADVICE FOR YOUR FURNITURE TO LAST, CORRECT ASSEMBLY AND PROPER MAINTENANCE ARE NECESSARY. PLEASE FOLLOW THE INFORMATION PROVIDED BELOW TO FULLY ENJOY YOUR FURNITURE BASIC ASSEMBLY TECHNIQUES When dock or spring washer is used in an assembly, please make sure the rock of spring washer is placed between the larger flat washer and the head of the screw or bolt. Some furniture comes with height adjustment knobs underneath each leg.
Before you begin, please read Page 2 of "Assembly and Care Advice". And remember, do not tighten until each step is completed or instructed.
Before you begin, please read Page 2 of "Assembly and Care Advice". And remember, do not tighten until each step is completed or instructed.
#F x PCs Exploded View @ Attach leveler (#F) onto the side frames Levelers (#F) can be adjusted according to ground level.
#A x PCs #H x 1pc #B x PCs #C x 1pc #D x 1pc Align shelves (#2) and connect tube (#3) to the side frames then secure by using bolts (#A) SCREWDRIVER A J (NOT PROVIDED), Align crossbars (#4) fo the side frames then secure hy using bolts (#8) 2) Align crossbars (#4) to each other, then secure by using bolt with nut Page 6 of 7
Align the product onto the wall to figure out where the anchor placement would be, then drill hole onto wall and place anchor.
