ASSEMBLY INSTRUCTIONS TOOLS REQUIRED Allen Wrench {Included} Phillips Screwdriver {Nok Include) 3 People Recommended eet ge EASY = DIFFICULT The Assembly Rating is a 5-point system showing the level of effort needed ta assemble a specific product.
CHECK BEFORE STARTING Are you missing anything? Double-check all parts, hardware and accessories listed on Page 6 are accounted for, Should we send any replacements? Are there any irregularities or flaws in the parts? We can send replacements! Check out our Quick Tips! We recommend reviewing the per-assembly handouts. Even experts need a refresher now and then! Prep Time! Please review the assembly instructions and aif diagrams prior to assembling.
PRE ASSEMBLY INTRODUCTION We understand building ready-to-assemble furniture can be a challenging experience for some. To help avoid confusion, we have provided some helpful tips that may speed up the process. Teamwork ALWAYS have at least two people to help with transporting and assembling the product to avoid potential injury and/or damage. Suitable Location Assembling near the area of the intended location is highly recommended.
ASSEMBLY AND CARE ADVICE A FAILURE TO FOLLOW THE GUIDELINES BELOW MAY RESULTING INJURY AND/OR PROPERTY DAMAGE. Position’ each part flavored encl insert sowers or holy inch their respective holes. Tenn clockwise Yo tighten and nly tighten When steps completed whenever instructed Hr dos: User the appropriate hand fools arterioles for assembly.
Carton Designation Part Hardware Cali.King #1 Size Bed HB| Cali.
ASSEMBLY INSTRUCTIONS T Align TIE Togs (73) © The 1 headboard then secure by Area dowels TRAY Fs using bolts (#C} with washers Part @) ripe headboard (#1) (#D E). Part@) «apes Hardware @ PCs Hardware €B) capes Hardware §Q apexes Hardware i) xdpcs STEP 3-1 Hardware @B) apexes Hardware ¢Q capes STEP Secure HB legs (#3) onto headboard (#1) by using bolts then covering with caps 2 Follow same step 1 as the headboard, but apply i to the foot board.
3 Part@ PCs Part @) dopes Part) xBpcs Hardware @D) SPCA Hardware @Dx16pcs Hardware @) capes ASSEMBLY INSTRUCTIONS 1) Align and hook the side rails (#5) to the headboard and foot board, then using a rubber mallet with cloth to apply pressure on the side rails (#5) to be fully secured, 2) Align brackets (£4) to the headboard and side rails, then secure by using screws WARNING § MAKE SUE FIXING “HORRIFYINGLY wr Raiser 3) Attach support legs (#7) to the slats then align stats (#6) to the side rails Secure by us
