FOA772RD FOA772GY Screwdriver (Not included) Mallet (Not included) 22-08-18 1/7
/7
/7
/7
PICK UP BED PARTS 1 6 SLAT SUPPORT STEEL x 2 pcs. LEFT RAIL x 1 pc. 7 2 RIGHT RAIL x 1 pc. PLATE x 4 pc. 8 3 SLAT SUPPORT x 4 pc. WHEEL x 4 pc. 9 4 SLATS x14 pc. HEADBOARD x 1 pc. 10 5 FOOTBOARD x 1 pc. REMOTE CONTROL,ADAPTOR x 1 pc.
HARDWARE A B MINIFIX NUT x6 pc. E YSB SCREWS M5x25 x28 pc. I STEEL DOWEL x16 pc. C D MINIFIX WHITE PLUG x6 pc. MINIFIX STUD x6 pc. F G YSB SCREWS M6x12 x8 pc. BUTTERFLY BOLT M6 x6 pc. J K YSB SCREWS M3x20 x16 pc. YSB SCREWS M6x60 x16 pc. 6/7 DOWEL x4 pc. H YSB SCREWS M6x35 x4 pc. L GRIP x2 pc.
ASSEMBLY INSTRUCTIONS 1 Part #1 x 1 pc Part #3 x 2 pcs Hardware #E x 14 pcs Hardware #B x 3 pcs Align the Slat supports (#3) to the Left rail (#1) and secure using Screws (#E). Attach the Studs (#B) to the left rail as shown in the diagram. #3 #1 B E 2 A D 2 Part #4 x 1 pc Hardware #D x 4 pcs Hardware #A x 6 pcs Insert Nuts (#A) and dowels (#D) into the Headboard (#4).
ASSEMBLY INSTRUCTIONS 3 Part #1 x 1 pc Part #5 x 1 pc Part #4 x 1 pc Part #6 x 2 pc Hardware#G x 4 Align the Slat support steel (#6) to the Left rail (#1) and secure using screws (#G). Align the Headboard (#4) and the Footboard (#5) to the Left Rail (#1) and secure by locking the Nuts (#A). #4 #5 #6 G #1 4 Part #2 x 1 pc Hardware #F x 4 pcs #2 #6 #5 F Align the Right rail (#2) to the Slat support steel (#6), Headboard(#4), and the Footboard (#5). Secure the Footboard (#5) using Bolts (#F).
ASSEMBLY INSTRUCTIONS 5 Hardware #G x 4 pcs Secure the Slat support steel (#6) to the Right rail (#2) with screws (#G). #2 G #6 6 Insert Steel dowel (#H) to the Plate (#7).
ASSEMBLY INSTRUCTIONS 7 Part #7 x 1 pc Part #8 x 1 pc x4 Attach Wheel (#8) to the Plate(#7). #8 #7 x4 8 Secure using Screws (#K).
ASSEMBLY INSTRUCTIONS 9 Hardware #J x 4 pcs Align the Wheels to the Right side (#2) rail and secure using Screws (#J). #2 J #1 10 Align the Wheels to the Left side (#1) rail and secure using Screws (#J). Connect Adaptor (#10).
ASSEMBLY INSTRUCTIONS 11 #9 Part #9 x 14 pcs Insert the Slats (#9) on to the Slat support steels (#3). #3 12 Align the Grips to the side rails and secure using screws (#H).
ASSEMBLY INSTRUCTIONS 13 7/7
