ASSEMBLY INSTRUCTIONS VERSION # 20-02-17 1112 TOOLS REQUIRED Allen Wrench {Included Phillips Screwdriver {Not Included) People Recommended 000°" EASY wmmremeeetoe DIFFICULT The Assembly Rating is a 5-point system showing the level of effort needed to assemble a specific product.
CHECK BEFORE STARTING Are you missing anything? Double-check all parts, hardware and accessories sifted on Page 6 are accounted for, Should we send any replacements? Are there any irregularities or flaws in the parts? We can send replacements! Check out our Quick Tips! We recommend reviewing the per-assembly handouts. Even experts need a refresher now and then! Prep Time! Please review the assembly instructions and aff diagrams prior to assembling.
PRE ASSEMBLY INTRODUCTION ‘We understand building ready-oi-assembie furniture can be a challenging experience for some. To help avoid confusion, we have provided some helpful tips that may speed up the process. Teamwork ALWAYS have at least two people to help with transporting and assembling the product to avoid potential injury and/or damage. Suitable Location Assembling near the area of the intended location is highly recommended.
ASSEMBLY AND CARE ADVICE FAILURE TO FOLLOW THE GUIDELINES BELOW MAY RESULT IN INJURY AND/OR PROPERTY DAMAGE. 1 Turn clockwise fo tighten and only tighten when step is completed or when instituted 0 do so. Position each part correctly and insert sprawls or bolls into their respective holes. Use the appropriate hand tools or power tools for assembly.
ASSEMBLY INSTRUCTIONS Remove HB legs (#5) from the back compartment 1 of the headboard x1pc 2 PCs x1pc Hardware(Q) PCs Hardware(#) PCs Hardware(#o PCs “sl Align HB legs to the headboard then secure by using bolts (#C) with washers 9/12
ASSEMBLY INSTRUCTIONS secure bolts (#0) with washers (#H F) 75% into the holes of the headboard then rest the sid rails {#3) onto bolts Fully secure bolts (#D 5 Part (#3) exposes Hardware(#) ripe Hardware{e) dopes PCs Secure bolts (#8) with washers 75% into #8 the holes of the foot board then rest the side rails (#3) onto bolts Fully secure bolts 6 Align center slat (#9) to the holes of the slats then secure by attach support legs (#8) onto the pe slats Adjust the leveler on the support legs expos {#8} acco
