ASSEMBLY INSTRUCTIONS VERSION # 18-10-05 TOOLS REQUIRED Allen Wrench {included) Phillips Screwdriver {Not inched) 2 Persons Recommended 000°C EASY. DIFFICULT The Assembly Rating is a 5-point system showing the level of effort needed to assemble a specific product.
CHECK BEFORE STARTING Are you missing anything? Double-check all parts, hardware and accessories sifted on Page 6 are accounted for, Should we send any replacements? Are there any irregularities or flaws in the parts? We can send replacements! Check out our Quick Tips! We recommend reviewing the per-assembly handouts. Even experts need a refresher now and then! Prep Time! Please review the assembly instructions and aff diagrams prior to assembling.
PRE ASSEMBLY INTRODUCTION ‘We understand building ready-oi-assembie furniture can be a challenging experience for some. To help avoid confusion, we have provided some helpful tips that may speed up the process. Teamwork ALWAYS have at least two people to help with transporting and assembling the product to avoid potential injury and/or damage. Suitable Location Assembling near the area of the intended location is highly recommended.
ASSEMBLY AND CARE ADVICE FAILURE TO FOLLOW THE GUIDELINES BELOW MAY RESULT IN INJURY AND/OR PROPERTY DAMAGE. J : \ Turn clockwise to tighten and only tighten when step is completed or when instructed io do so. Position each part correctly and Insert screws or bolls into their respective holes. Use the appropriate hand {loos or power tools for assembly. Select steps, such as lightening screws and/or bolts, may require hand fools to avoid causing damage during assembly.
+» Plastique keep crucifixions fof Re tore preference.
ASSEMBLY INSTRUCTIONS Align HB crossbars (#3) to the HB supports. then secure by using bolts (#A) Part@) expel Part@) x1pc Part@) PCs Hardware A) PCs Part §19 x 1pc Hardware (FE) *apes Align HB to HB panel then secure by using bolts (FE).
ASSEMBLY INSTRUCTIONS Part@) expel Part@ x1pc Hardware (EA) apexes 4 Part (36) expel Part (#7) =x1pc Part (38) *1pc Part (49) x pe Part §1) x1pc Hardware (4A) apexes #6 Align bed rails to the headboard, then secure by using bolts Align bench legs to the seat support frame (#11) just like how it's shown in the diagram.
ASSEMBLY INSTRUCTIONS Align shelf frame (#10) to the legs, then secure by using bolts 6 Align bench frame to seat cushion then secure by using screws Part é x1pc There wilt be no per-drilled holes of the seat cushion Hardware @F) *apes gr
ASSEMBLY INSTRUCTIONS 7 Part) «1pc Part@d expel Hardware) apexes 8 Part én x1pc Part 1) PCs Hardware) apexes Align bed rails {#4 ,5) to the bench, then secure by using jolts (HA).
ASSEMBLY INSTRUCTIONS Align and attach slats (#15) to bed rails, 11 Part 13 *x12pes Align rail reinforce (#16) to the 1 2 bed rails, then secure by using Part éd PCs obis © Keep this handy! Plans anal 8 nation infotainment rR lees.
