Assembly Instructions ASSEMBLY RATING Tools Required For Assembly: The Assembly Rating is a 5-point system that (included) shows the degree of effort needed in Allen Wi h assembling a specific product (with 1 being e Irene fi easy and 5 being difficult).
ASSEMBLY & CARE ADVICE FOR YOUR FURNITURE TG LAST.CORRECT ASSEMBLY AND PROPER MAINTENANCE ARE NECESSARY. PLEASE FOLLOW THE INFORMATION PROVIDED BELOW T FULLY ENJOY YOUR FURNITURE BASIC ASSEMBLY TECHNIQUES 1 W When lock or spring washer is used in an assembly, please make sure the lock or spring washer is placed between the forger flat washer and the head of the sower or bot. 4 Same furniture comes with height adjustment knobs underneath each leg.
Before you begin, please read Page 2 of "Assembly and Care Advice". And remember, do not tighten until each step is completed or instructed.
Align table legs (#2) to the table top then secure by using blats (#A) with washers #A X apes #B x PCs #C x apes ASSEMBLY IS COMPLETED Page 4 of 7
And remember, do not tighten until each step is completed or instructed. Before you begin, please read Page 2 / of "Assembly and Care Advice". Parts List #1 x1pcx 4 Chair Back #2 x 1pcx 4 Seat #3 x2pcsx 4 Front Leg L/R #4 x PCs x 4 Side stretcher L/IR e /#1 x4 Bolt @1/4" x / Bolt &1/4" x .
Align seat (#2) to the chair back then secure middies hole of the seat (#2) o chair back {#1) by using obit (#C) with washers Secure corner holes of seat (#2) to chair back (#1) by using bolts (#A) with washers #Ax PCs #D x PCs #E x PCs Page 6 of 7
Align stretchers to the chair back legs and front legs then secure front legs by using boils (#B) with washers #B x PCs #D x pecs #E x PCs #F x PCs Secure stretchers 10 legs by using screws Page 7 of 7
90-DAY LIMITED REPLACEMENT PARTS WARRANTY “This fem comes with a 90-day limited replacement pairs warranty to the original purchaser of new products against defects in materials and workmanship for a period of ninety (90) days from the date of receipt. This warranty is not transferable.
