Instructions / Assembly

I. Prepare 4 bolt assemblies by inserting FIRST the lock washer (#B) onto the bolt (#D)
and then the flat washer (#A) onto the SAME bolt (#D), in that order.
II. Insert the bolt assemblies through the pre-drilled holes in the corners of the seat (#2)
and secure those bolts using the Allen wrench (#F) to lock them with the front left leg (#3)
and front right leg (#4).
I. Attach the leg supports in the
designated slots along the legs.
II. Insert the wood screw (#G) at
a diagonal using a Phillips screwdriver.
Tighten screws until properly secure.
ASSEMBLY IS COMPLETED