ASSEMBLY RATING The Assembly Rating is a 5-point system that shows the degree of effort needed in assembling a specific product (with 1 being easy and 5 being difficult). For some products, two persons are recommended.
ASSEMBLY & CARE ADVICE FOR YOUR FURNITURE TO LAST, CORRECT ASSEMBLY AND PROPER MAINTENANCE ARE NECESSARY. PLEASE FOLLOW THE INFORMATION PROVIDED BELOW TO FULLY ENJOY YOUR FURNITURE. BASIC ASSEMBLY TECHNIQUES When lock or spring washer is used in Position each part correctly and insert Use cardboard or carpet area when an assembly, please make sure the screws or bolts into their respective assembling furniture to prevent rock of spring washer is placed holes by hand tighten or using the scratches .
Before you begin, please read Page 2 of "Assembly and Care Advice". And remember, do not tighten until each step is completed or instructed.
#A x 2 pcs #B x 2 pcs #C x 2 pcs |. Place the backrest with lags (#1) on a protected surface Align the seat (#2) with the per-drilled holes of the backrest with legs Ii. Prepare a bolt assembly by inserting FIRST the lock washer #8) onto the bolt (#C} and then the flat washer (#A) onto the SAME bolt in that order.
1. Prepare 4 bolt assemblies by inserting FIRST the lock washer (#8) onto the bolt (#0) #A X 4 PCS | 414 then the fiat washer (#4) onto fhe SAME ball (4D), in that order. #B x 4 pcs 11. Insert the bolt assemblies through the per-drilled holes in the corners of the seat (#2) #D X 4 pcs and secure those bolts using the Allen wrench (#F} to lock them with the front left leg (#3) and front right leg #G Xx 6 pcs 1. Attach the leg supports in the designated slots along the legs i.
