Instructions / Assembly

Identifying Drawer R ail s
Each drawer requires a set of 4 rails. Please review the
below instructions to help identify the different rails. Left and
right determined from the viewpoint of opening the drawer.
Right/Left Panel Rail:
(C-shaped frame)
Align the drawer rails horizontally, with
the oval and round holes resting flat
against a surface. Rotate as needed so
the rollers are located on your
right-hand side. If the roller is closer to
the bottom corner, this is the RIGHT
panel rail. If the roller is closer to the top
corner, this is the LEFT panel rail.
Right Panel Rail
Left Panel Rail
Right Drawer Rail
Left Drawer Rail
Right/Left Drawer Rail:
(S-shaped frame)
Align the panel rails horizontally. Rotate
as needed so the rollers are located on
your right-hand side. If the roller faces
away from you, this is the RIGHT
drawer rail. If the roller faces towards
you, this is the LEFT drawer rail.
When grouped together, the right drawer rail and right panel rail will interlock with
rollers at opposite ends. Likewise for the left drawer and left panel rails.