ASSEMBLY INSTRUCTIONS VERSION # 21-03-18 =o 100L8 REQUIRED Hammer {Not Incidence) Philips Screwdriver {Mot Coincided) 2 People Recommended EASY mmm DIFFICULT The Assembly Rating is a S-point system showing the level of effort needed to assemble a specific product 14145
CHECK BEFORE STARTING Are you missing anything? Double-check all parts, hardware and accessories listed on Page § are accounted for Should we send any replacements? Are there any irregularities or flaws in the parts? We can send replacements! Check out our Quick Tips! We recommend reviewing the per-assembly handouts. Even experts need a refresher now and then! Prep Time! Please review the assembly instructions and all diagrams prior lo assembling.
PRE ASSEMBLY INTRODUCTION We understand building ready-to-assemble furniture can be a challenging experience for some. To help avoid confusion, we have provided some helpful tips that may speed up the process. Teamwork ALWAYS have at {east two people to help with transporting and assembling the product to avoid potential injury and/or damage. Suitable Location Assembling near the area of the intended location is highly recommended.
ASSEMBLY AND CARE ADVICE A FAILURE TO FOLLOW THE GUIDELINES BELOW MAY RESULT IN INJURY AND/OR PROPERTY DAMAGE. Turn clockwise fo tighten and any tighten when step is completed or when instructed to do so Position each part correctly and insert screws or bolts info their respective holes. Use the appropriate hand tools or power tools for assembly. Select steps, such as tightening screws and/or bolts, may require hand totals to avoid causing damage during assembly.
CAM LOCK FASTENER ASSEMBLY INSTRUCTIONS Note : Every cam lock bolt must have a cam lock corrector in order io fasten the parts together. Wes 1 Screw the cam bolt into panel. Align the cam lock with its side opening {or arrow} pointing to cam bolt cam bolt cam lock screwdriver 2 Sy Insert the cam bolt into the bolt hole of joint panel.
Assemblymen IND RUCTIONS 1 Hardware (1) x PCS Hardware (3) x PCS Accessory (Ajax PCS Accessory (AZ]x PCS Accessory (AS|x 1PC Apply a dab of glue info dowel holes of panels before inserting dowels 8/15
Assemblymen IND RUCTIONS 2 Part @ PCs Hardware (§)x PCS Hardware (§)x PCS Hardware (7)x PCS Hardware (§)x PCS 6 3 Part @ x1PC Part § x1PC Hardware (2x 1PC Finished Side Gasses refer to Page § for detailed instructions on how to fasten cam licks (#2) to vam bolls Please ensure the hole whore the cam lock (#2) gaps ina on panel (#H} is facing inwards of panel (HD) J 8/15
Assemblymen IND RUCTIONS 4 Part 8 x1PC Part (§ x1PC Hardware (2x 1PC Finished Side v 4 Please refer Io Page 5 for detailed instructions on how to fasten cam rooks (#2) to cam bolls Please ensure the hole where the cam lock (#2) goes into on panel (#H) is lacing inwards of | pane HE).
Assembly INO INSTRUCTIONS 6 Part §& x1PC Hardware (2x PCS , Dowel nose RY Part §% x1PC Hardware (2x PCS Accessory (Ad)x PCB Please refer ta Page 5 for detailed instructions an how io tartan cam (oiks (#2} to vam bulls Use the provided stickers (#A3) lo cover exposed for 11715
Assemblymen IND RUCTIONS 8 @f Part §§ PCs Hardware (4x PCS Hardware (@)x 1PC 9 Accessory (Ag]x 1PC Top Front pe For sanely. please ase the depravity hardware to secure the unit anti fie wall.
Assemblymen IND RUCTIONS 10 11 Part (8 x PCS Hardware (§)x PCS HOLE USAGE Align Screws with the darkened holes in the above diagram {HINGE ADJUSTMENT | Depth Adjustment.
Assemblymen IND RUCTIONS () Keep this handy! Firebase retain this instruction manual and any order teared information for ireful reference (@ Lift, don't drag! To avoid damage to product please sways LIFT the product when transporting of adjusting the placement 14/715
Assembly INo RUCTIONS Wall Mounting and Fixing == EXPANSION WALL ANCHOR Our provided expansion wall anchors are only suitable for masonry walls, such as drywall, plaster or concrete, and are best for holding lightweight items or for anti-lip prevention. if you are unsure of the correct wall anchor to use with the product, please request professional guidance. ability for product damage or failure due to using the incorrect anchors will fall on the installer. 1.
