Assembly Instructions

Insert barrel nuts (#C) to the holes of the side rails (#5,6). Align
side rails (#5,6) to the holes of the guardrails (#1,2). Secure by
tightening bolts (#A) onto barrel nuts (#C).
1) Insert dowels (#I) to the dowel holes of the guardrails (#3,4).
Align side rails (#6,7), with inserted barrel nuts (#C), to the holes
of the guardrails (#3,4). Secure by tightening bolts (#A) onto
barrel nuts (#C), but do not fully tighten.
2) Align guardrails (#8,9) to the holes of
the side guardrails (#3,4). Secure by
using screws (#B).