Assembly Instructions

1) Align ladder A (#11) to
the holes in-between the
bunk beds. Secure the top
ladder (#11) hole with Bolts
(#A) that contains lock
washer (#G).
2) Secure ladder holes (#11)
on the side of the left HB with
bolts (#B) that contains washer
(#G).
3) Secure ladder holes (#11) on the bottom
of side rails with bolts (#E) that contains
washer (#G).
1) Align upper panel (#5) to the top holes of the posts (#12,13).
Attach the upper panel (#5) top holes to the top holes of the
posts (#12,13).
2) Secure the bottom holes of the upper panel (#5) with
bolts (#A) that contains washer (#G).