For more information contact our team: service.ec@foagroup.
DO NOT FULLY TIGHTEN ALL BOLTS UNTIL FULL ASSEMBLY OF PRODUCT IS COMPLETED. 1) Align box seat (#7) to the chair back (#1). Secure middle hole of seat (#7) to chair back (#1) by using bolts (#C) with washers (#F,G). PLACE CHAIR ONTO A TABLE UPSIDE DOWN 2) Secure corner holes of the seat (#7) to chair back (#1) by using bolts (#E) with washers (#F,G). 3) Align middle stretcher (#6) to the right side stretcher (#4), then secure by using screw (#A).
2) Align left stretcher (#5) to the gaps of the legs and middle stretcher (#6). 3) Secure middle stretcher (#6) by using screws (#A). #5 #5 4) Secure left stretcher (#5) to legs by using screws (#A). 1) Align front leg (#3) to the seat (#7), then loosely secure by using bolts (#D) with washers (#F,G). Align wooden seat (#8) to the chair frame, then secure by using screws (#B).
