Selection Guide

Hubbell Industrial Controls, Inc.
Class 69 Special Application Pressure Switch
Page 2
4269SA
Application
69W Dimensions
Hubbell Industrial Controls, Inc.
A subsidiary of Hubbell Incorporated
4301 Cheyenne Dr., Archdale, NC 27263
Telephone [phone] • Fax [phone]
http://www.hubbell-icd.com
[e-mail]
Modifications
Catalog Number Suffix
Description Add suffixes in order shown
Auto-off disconnect lever L
1/4" quick connects (load terminal only) A 24 pc min
Pulsation orifice B 24 pc min
Two grommets for 1/2" conduit hole G 24 pc min
NEMA 3 outdoor weatherproof enclosure- W no minimum
Cannot be used with auto-off disconnect switch
NEMA 4 watertight enclosure- X no minimum
Cannot be used with auto-off disconnect switch
Pipe Fittings
1/4" male NPT 2A 24 pc min
Special pressure settings: Suffix Z is followed by setting Z† 24 pc min
Example: 69WA4Z2040
† See Instruction Sheet included with switch for manual adjusting instructions.
69W–NEMA 3 and 4
Water Tight
Dimensions
Pressure Adjustment Settings
Screw A–Turn clockwise to increase and counterclockwise to
decrease pressure range (both cut-in and cut-out).
Differential Adjustment
Screw B–Turn clockwise to increase and counterclockwise to
decrease cut-out pressure.
NOTE: Differentials shown on tables (over) are averages only.
Connection Diagram