Brochure
Table Of Contents
- 2 3RV1 Circuit Breaker/MSP 1)
- 2.1 Specifications/regulations/approvals
- 2.2 Device description
- 2.3 Application and areas of use
- 2.4 Accessories
- 2.4.1 Attachable accessories: Overview
- 2.4.2 Auxiliary contacts 3RV19 01-.., alarm switch 3RV19 21-111 and auxiliary release 3RV19 .2-....
- 2.4.3 Motorized remote-control mechanism 3RV19 .6-....
- 2.4.4 Disconnecting/isolator module 3RV19 .8-1A
- 2.4.5 Thru-the door rotary operators 3RV19 .6-..
- 2.4.6 Terminals for "Combination Motor Controller Type E" in acc. with UL 508
- 2.4.7 Enclosures and mounting accessories
- 2.4.8 Busbar adapter 8US1 (Fastbus system)
- 2.4.9 Isolated 3-phase busbar system
- 2.4.10 Link module for connection to a contactor
- 2.5 Mounting and connection
- 2.6 Dimensional drawings (measurements in mm)
- 2.7 Technical specifications
- 2.7.1 General specifications
- 2.7.2 Permissible rating of approved devices for North America, u s
- 2.7.3 Short-circuit breaking capacity Icn in acc. with IEC 60 947-2
- 2.7.4 Limiter function with standard devices for 500 VAC and 690 VAC in acc. with IEC 60 947-2
- 2.7.5 Characteristics
- 2.7.6 Installation guidelines
- 2.8 Application notes for the use of 3RV1 downstream from frequency converters/ inverter with pulsing voltage
Circuit Breaker/MSP 3RV1
SIRIUS System Manual
2-58 GWA 4NEB 430 0999-02 DS 01
Thru-the-door rotary operators
Fig. 2-58: 3RV19 26-0. (short shaft for circuit breaker/MSP frame sizes S0, S2, S3)
Fig. 2-59: 3RV19 26-0. (Long shaft (with support) for circuit breaker/MSP Frame sizes S0, S2, S3)
NSB 01089b
min. 55
2)
1)
5
45
66
19
15
1 ... 4
17
33
max. 327
34,5
1) Abschließbar in Nullstellung mit Bügeldurchmesser max. 8 mm
2) Befestigung mit Überwurfmutter
NSB01107
3
22,5
24,3
4)
min. 45
max. 130
4) Lieferzustand mit Wellenlänge von 130 mm durch Kürzen der Welle anpassbar
1)Lockable in 0 position with shackle (max. 8 mm in diameter)
2)Affixed with screw caps
3) Supplied with a shaft length of 130 mm: adaptable by shortening of the shaft
NSB 01090b
16
5)
min. 55
2)
1)
5
45
66
19 15
1 ... 4
17
33
max. 327
34,5
5) Erdungsklemme 35 mm
2
und Haltewinkel für 330 mm Welle
1) Abschließbar in Nullstellung mit Bügeldurchmesser max. 8 mm
2) Befestigung mit Überwurfmutter
NSB01108
3)
min. 45
3
22,5
24,3
max. 330
3) Lieferzustand mit Wellenlänge von 330 mm durch Kürzen der Welle anpassbar
3) Supplied with a shaft length of 330 mm: adaptable by shortening of the shaft
1)Lockable in 0 position with shackle (max. 8 mm in diameter)
2)Affixed with screw caps
5) Ground terminal 35 mm
2
and support bracket for 330 mm shaft










