Brochure
Table Of Contents
- 2 3RV1 Circuit Breaker/MSP 1)
- 2.1 Specifications/regulations/approvals
- 2.2 Device description
- 2.3 Application and areas of use
- 2.4 Accessories
- 2.4.1 Attachable accessories: Overview
- 2.4.2 Auxiliary contacts 3RV19 01-.., alarm switch 3RV19 21-111 and auxiliary release 3RV19 .2-....
- 2.4.3 Motorized remote-control mechanism 3RV19 .6-....
- 2.4.4 Disconnecting/isolator module 3RV19 .8-1A
- 2.4.5 Thru-the door rotary operators 3RV19 .6-..
- 2.4.6 Terminals for "Combination Motor Controller Type E" in acc. with UL 508
- 2.4.7 Enclosures and mounting accessories
- 2.4.8 Busbar adapter 8US1 (Fastbus system)
- 2.4.9 Isolated 3-phase busbar system
- 2.4.10 Link module for connection to a contactor
- 2.5 Mounting and connection
- 2.6 Dimensional drawings (measurements in mm)
- 2.7 Technical specifications
- 2.7.1 General specifications
- 2.7.2 Permissible rating of approved devices for North America, u s
- 2.7.3 Short-circuit breaking capacity Icn in acc. with IEC 60 947-2
- 2.7.4 Limiter function with standard devices for 500 VAC and 690 VAC in acc. with IEC 60 947-2
- 2.7.5 Characteristics
- 2.7.6 Installation guidelines
- 2.8 Application notes for the use of 3RV1 downstream from frequency converters/ inverter with pulsing voltage
3RV1 Circuit Breaker/MSP
SIRIUS System Manual
GWA 4NEB 430 0999-02 DS 01
2-47
Fig. 2-33: Mounting the isolated 3-phase busbar system (frame size S2)
2.4.10 Link module for connection to a contactor
Link Module
Circuit breaker/MSP-
Contactor
When assembling a combination starter (load feeder) a link module between
the circuit breaker/MSP and the contactor is needed to provide both an elec-
trical and mechanical connection. The following types of link modules are
available:
Frame size S2
Screw connection
3RV19 35-5A
3RV19 35-6A
3RV19 35-1.
3RV19 35-1C
Operating voltage
Contactor
Frame size
Contactor
Frame size
Circuit breaker/MSP
AC and DC S00 S00
S00 S0
S0 S0
S2 S2
S3 S3
Table 2-19: Link module circuit breaker/MSP-contactor