Brochure

3RV1 Circuit Breaker/MSP
SIRIUS System Manual
2-38 GWA 4NEB 430 0999-02 DS 01
Accessories for the housings and front plates
The following accessories are available for the housings and front plates of
the circuit breakers/MSPs:
• Replacement actuator membrane 3RV19 13-7F (for frame size S00)
• Locking device for 3 padlocks 3RV19 13-6B (for frame size S00)
• Emergency-stop button (red/yellow) 3RV19 13-7D (for frame size S00)
• Emergency-stop button (red/yellow) with safety lock 3RV19 13-7E (for
frame size S00)
• Indicator lights 3RV19 03-5. (for frame sizes S00, S0, S2)
Fig. 2-26: Accessories for the enclosures and front plates (frame size S00)
Locking device 3RV19 13-6B (for frame size S00)
The locking device can be used on the inside of the housings or front plates.
To do this, remove the frame of the actuator membrane. The locking device
can be secured with up to 3 padlocks that can prevent the circuit breaker/
MSP from being switched on during maintenance work, for example.
Emergency-stop button 3RV19 13-7. (for frame size S00)
The emergency-stop button is attached to the actuator membrane. When
hit, the circuit breaker/MSP is switched off and the button locks into posi-
tion. You can release the button by turning it or using a key. The circuit
breaker/MSP can then be switched on again.
Indicator lights 3RV19 03-5B (for frame sizes S00, S0, S2)
Indicator lights are available for the housings and front plates of circuit
breakers/MSPs in frame sizes S00, S0, and S2. They contain a glow lamp
and red, green, yellow, orange, and transparent lenses. Indicator lights are
available for the following voltage ranges: 110-120 V, 220-240 V, 380-415 V
and 480-500 V.
3RV19 13-6B
3RV19 13-7D
3RV19 13-7E
1
2
3RV19 13-7F