Brochure

Table Of Contents
3RV1 Circuit Breaker/MSP
SIRIUS System Manual
GWA 4NEB 430 0999-02 DS 01
2-35
2.4.7 Enclosures and mounting accessories
Molded-plastic enclosures (IP55) are available if you want to install circuit
breakers/MSPs as single units. All the enclosures are equipped with neutral
and ground terminals. Above and below are two openings that can be
knocked out for cable glands. On the back of the enclosure there are
2 precut openings. All the cable bushings have metric dimensions. The sur-
face casings can be sealed. There is space in the enclosure on the rail for
additional modular terminal blocks.
Widths The widths of the enclosures depend on whether auxiliary releases are used:
54 mm: circuit breaker/MSP + side-mount auxiliary contact
72mm/82 mm: circuit breaker/MSP + side-mount auxiliary contact+ auxil-
iary release
Mounting the
surface mount enclo-
sure
Fig. 2-22: Molded-plastic surface mount enclosure (frame size S00)
Model
Molded-
plastic...
Width Frame size
Enclosure with actuator membrane for toggle
switch
Surface mount
54 mm, 72 mm S00
Flush mount
72 mm S00
Lockable enclosure with rotary switch Surface mount
54 mm, 72 mm
82 mm
S0
S2
Flush mount
72 mm S0
Lockable enclosure with emergency stop rotary
switch (red/yellow)
Surface mount
54 mm, 72 mm
82 mm
S0
S2
Flush mount
72 mm S0
Table 2-12: Enclosures for 3RV1 circuit breakers/MSPs
3
4
1
2
Neutral/ground terminals