Brochure

3RV1 Circuit Breaker/MSP
SIRIUS System Manual
2-24 GWA 4NEB 430 0999-02 DS 01
7
Screw the frame onto the mount-
ing surface using 4 screws M4
(Frame size S2), M5 (Frame size
S3)
8/9
Attach the circuit breaker/MSP
using 2 screws.
Attention:
Use screws 14 mm in length.
10
Attach the ground wire.
11
Connect the main and control
wires to the circuit breaker/MSP.
12
If desired, set MANUAL RESET:
Remove the screw from the
RESET lever.
13-15
Put the remote-control mecha-
nism module into place,
making sure that the driver covers
the knob on the circuit breaker/
MSP, and screw it on.
Drawing Step Procedure
Table 2-9: (cont.) Mounting the remote-control mechanism (example: frame size S2)
7
9
9
7
8
S2: M4 / S3: M5
M5 (4 x)
3RV19 21-1M
15
12
Manual-
RESET
14
13
(4 x)
Automatic-
RESET
10
11