User's Manual

7
FRANÇAIS
ENGLISH
ESPAÑOL
126 VAC, consider installing a Furman voltage regulator.
SERVICE
If you require technical support or equipment service, please contact the Furman Service Department at 707-763-1010. You may
also email [e-mail].
All equipment being returned for repair must have a Return Authorizaon (RA) number. To get an RA number, please call the
Furman Customer Service Department.
Before returning any equipment for repair, please be sure that it is adequately packed and cushioned against damage in shipment,
and that it is insured. We suggest that you save the original packaging and use it to ship the product for servicing. Also, please pro-
vide a note giving your name, address, phone number, RA number and a descripon of the problem.
5 YEAR LIMITED WARRANTY
SAVEYOURSALESRECEIPT!The receipt is your proof of purchase and conrms the product was purchased at an authorized Furman
dealer. It will need to be submied to Furman in order to process any warranty claims.
Furman, a brand of Panamax Inc., warrants its PL-PRODMC (the “Product”) as follows:
Furman warrants to the original purchaser of the product that the product sold hereunder will be free from defects in material and
workmanship for a period of ve years from the date of purchase. If the product does not conform to this Limited Warranty during
the warranty period (as herein above specied), purchaser shall nofy Furman of the claimed defects by calling 707-763-1010 or
via email ([e-mail]). If the defects are of such type and nature as to be covered by this warranty, Furman
shall authorize purchaser to return the product to Furman headquarters. Warranty claims MUST be accompanied by a copy of the
original purchase invoice or receipt showing the purchase date. Shipping charges to Furman headquarters must be prepaid by the
purchaser of the product. Furman shall, at its own expense, furnish a replacement product or, at Furman’s opon, repair the defec-
ve product. Return shipping charges back to purchaser will be paid by Furman.
THEFOREGOINGISINLIEUOFALLOTHERWARRANTIES,EXPRESSORIMPLIED,INCLUDINGBUTNOTLIMITEDTOTHEIMPLIED
municaon devices by simply plugging the re-charge cord into the front panel socket. Please note that as there are currently many
standards for USB, some devices may not be compable with our charger.
TRANSFORMER PLUG (WALL WART) SECURING LOOPS:
Your 20 amp Furman Classic Pro Series condioner features rear panel AC outlets that are widely spaced for plug transformers (wall
warts). Addionally, these may be secured for transport with hook and loop straps (included). Each outlet has threaded screw
holes on either side to accommodate the hook and loop straps.
TROUBLESHOOTING
1.)Symptom: No power to the AC outlets.
PossibleCause: The circuit breaker (located on the front panel) has tripped due to excessive load.
AconNeeded: Unplug one piece of equipment from the Furman condioner and manually turn the unit o, then on again.
2.)Symptom: No power to the AC outlets, “Protecon OK” indicator is not lit.
PossibleCause: Either the AC outlet to which your Furman condioner is connected has no AC voltage present, or the protecon
circuitry in your unit has been compromised.
AconNeeded: Plug the Furman condioner into an AC receptacle where a nominal 120 VAC is present. If the problem persists,
contact Furman for service.
3.)Symptom: Extreme Voltage (EVS) indicator lit.
PossibleCause: Input voltage is above 140V causing power to the unit’s outlets to be shut down. Addionally, if the voltage is
below 85V – 90V at turn on, the unit will not allow AC voltage to reach the outlets.
AconNeeded: Correct the line voltage, then turn the Furman condioner on. If the voltage present is below 114 VAC or above