User Manual

3. GETTING START
1. Connecting to the Cleanflight software.
i. Install latest STM32 Virtual COM Port Driver
http://www.st.com/web/en/catalog/tools/PF257938
ii. Install and launch the Cleanflight Configurator tool
https://chrome.google.com/webstore/detail/cleanflightconfigurator/enacoimjcgeinfnnnp
ajinjgmkahmfgb (you need to open this link in Google Chrome. If you don’t have google
Chrome, download and install this first)
iii. Connect the flight controller to the computer via USB cable.
iv. Select the correct COM port if it is not automatically detected.
v. Click connect, verify that communication is established (Fig 1).
[Figure 1 - Setup tab after connection established]
vi. Verify all sensors on your board are giving correct readings (Fig 2).