User Manual

Throttle stick BACK (toward you, low throttle)
Use your TRANSMITTER servo reverse switches to get the sliders on the screen working in the
correct directions.
This is what full up elevator, low throttle, left aileron and left rudder should look like. Use your
transmitter travel adjust to get the sliders moving from 1000 to 2000 with full deflection on
each stick.
While on this screen, move the switches on your transmitter, and find one that moves any of the
auxiliary functions Aux 1-4. Note the Aux number associated with the switch you will use for
arming. If possible, program your transmitter so the switch controlling this function is in a
location that you can use it to disarm the model quickly in a crash. Arming and other switch
functions are activated in the MODES tab.