User Manual

7
 OSD:
Turn ON/OFF OSD on goggles.
 OSD RES:
Select video format to display on goggles.
The options are as follows: PAL/NTSC.
 Factory Reset:
Reset your settings to the original default when holding Mode button.
 Kerveros
Give the best possible signal when you are using from a low quality VTx, bad
antennas or on a bad environment.
In this mode, the two receivers are working independently with the different
frequencies and the module will choose a receiver that has the best signal.
 Lap Timer
Hold Mode button to go to Lap options menu.
RSSI Lap Strigger: set maximum RSSI value to strigger a Lap.
Min Lap Time in Secs: minimum time to complete one lap (from 8 to 20 seconds).
Threshold Nano Sec: this is the delay time when RSSI Lap Strigger becomes true and
then your module has to make sure that this value stays true for this before adding
one to the Lap count.
Push button to Up/Down button to start Lap Time.