User Manual

 Model Find

Find your quad when gets lost while flying. The finding bar will increase/decrease

depending on distance from your place (VRx) to quad (VTx). When the finding bar is

increasing that means you get the right direction and follow this direction to place

where fell down with a buzzer warning (Beeper) and RSSI level higher. However, this

function only work when your quad (VTx) is still working after the crash.

Note video tutorial: insert link later

 Settings

 Filter:

Configure antenna switching speed of filter. Antenna switching happens more

often when setting to Fast and antenna switching happens less often when

setting to Low. Default is Normal.

 RSSI Checks:

Select how many values that you want to get the average from them and then

decide if you should switch antenna.

 Sign:

Configure your sign/pilot name to be displayed on module. Utilize up to 9

alphanumeric characters and symbols. Press Mode button to move through 9

characters and exit.

 Calibrate:

When updating new firmware, you need to calibrate to get the best signal.

 Alarm:

Warning by buzzer when signal lower than the configured level.

The options are as follows: OFF, 10%, 20% and 30%.

 Pilot Mic:

Turn ON/OFF microphone on Achilles module.

 Flip Screen:

Flip display of OLED Screen on Module.

The options are as follows: ON/OFF