User's Manual

10
 Auto Lock BTN:
Auto locks the buttons after 5s and doesn’t allow channel changes by just moving
the trackball. You can unlock by holding down the trackball or the Exit Menu
button.
The options are as follows: ON/OFF.
 Trackball mode:
This determines the scrolling behavior of the trackball. It can be set to match the
icon movement on the OLED or in the OSD.
 OLED: used when looking directly at the OLED screen
 OSD: used when looking at the OSD display on in your goggles
 About:
Shows Hardware, Firmware versions and input voltage.
 Restore:
Press & hold Trackball button for 2s to restore the defaults.