Full Product Manual
Stainless Steel
Hot Dog Machine
Sanitary Glass Cover
1. Remove the 4 screws from the hotdog roller that will hold on the corners.
2. Place the front corners in place (towards the knobs),
a. attach the corners using the screws found in the hotdog roller.
3. Place the side glass into thecorners, the holes in the corners being forward and up.
4. Place the large curved glass top into the rear corners and on top of the side glass
5. Place the metal bar across the frong/top
6. Attach the metal bar to the side glass using the nuts and bolts.
The glass cover comes with:
2 front - squared 90 degree angle, slotted for side glass only
2 back - narrower angle, slotted for sides and top glass
2 pieces of side glass.
1 large curved glass top
1 metal bracket
2 cap screws and nuts to attach the metal bracket