Safer Choice Standard

Report No. 130815040GZU-001
IMPERIAL INDUSTRIAL SUPPLY
Page 13 of 33
Issued: 23-Dec-2013
Revised: None
Photo #
Item
no.
1
Name
Manufacturer/
trademark
2
Type / model
2
Technical data and securement
means
Mark(s) of
conformity
3
1 1
Power Supply
Cord Set
Various SJT
Rated VW-1, 300 V, 105℃; 18
AWG x 3 C, min. 0.6 m ~ 2.1 m
from the cord entry to the plug
surface. Terminated in a
grounding plug 5-15P.
cULus
1 2 Main Unit
NANFANG
MACHINE
FACTORY
Various
Models FT825CR measured
overall dimension 620 mm x 525
mm x 450 mm.
Model FT862CR measured overall
dimension 590 mm (L) x 435 mm
(W) x 365 mm (H).
Model FT824PP measured overall
dimensions of 645 mm (L) x 445
mm (W) x 368 mm (H).
All accessible edges were smooth
and well rounded. It consists of
the following parts, tightly fixed
together by screws.
NR
1 2a Top Cover Various Various
Enameled Steel, min. 0.7 mm
thick.
NR
1 2b Upper Enclosure Various Various
Enameled Steel, min. 0.7 mm
thick.
NR
1 2c
Lower Cover for
Upper Enclosure
Various Various
Galvanized Steel, min. 0.9 mm
thick.
NR
1 2d Frame Various Various
Aluminum plates, min. 1.5 mm
thick. Fixed together by screws.
NR
1 2e Kettle Hook Various Various
Models FT825CR, FT862CR,
Stainless Steel sheet. Two
provided, each tightly secured to
the lower cover by screws.
NR
1 2f Door Various Various
Thermoplastic, min. 3.0 mm thick.
Hinged on the frame.
NR
1 2g Chamber Walls Various Various
Tempered Glass, min. 3.0 mm
thick.
NR
1 2h Bottom Cover Various Various
Galvanized Steel sheet, min. 0.6
mm thick.
NR
1 2i Filter Plate Various Various
Galvanized Steel sheet, min. 0.5
mm thick. The Filter Plate secured
on bottom Frame by two screws.
NR
1 2j Crumb Tray Various Various
Galvanized Steel sheet, min. 0.5
mm thick.
NR
1 2k Block Plate Various Various
Stainless Steel , min. 0.5 mm
thick.
NR
1 2l Feet Various Various
Thermoplastic material. Four
provided, each Ø25 mm x 18 mm
high and secured to bottom cover
by screw.
NR
4.0 Critical Components
ED 16.3.15 (1-Jan-13) Mandatory