Replacement Part List

-3-
Fig.5
Finally, insert the internal plug into
the socket on the inner top
1. Place the kettle (B) on the
supporter and connect the socket
following
2.
3. Put the block plate(C) on the
filter.
4.
5. Insert the crumb tray (E) into the
opening at
the bottom of the unit.
F ig.3 Insert a pin through
the kettle and supporter.
Fig.3 Insert a pin through the
kettle and supporter.
Fig.2 Hold the kettle
on the supporter.
Fig.1
Screw the lips, axle
f ixer and stirrer onto the
g ear box in clockwise.
Part 1. Assembling kettle
FT8000CP
Assembling Procedures: