Instructions / Assembly

Cleaning and Maintenance
After using the popcorn machine, users should use wet towel to clean up the main unit, main
bacteria.
Quick Cleaning Procedure:
Switch ON the stirrer (II) & heater (III) again to boil the water and let the stirrer to turn in order to
remove excess amount of sugar stuck on the surface. Pour out the water after about 1 to 2
minutes of boiling. Caution: Hot kettle!
Repeat the same procedure 2 to 3 times to get better result.
Standard cleaning procedure:
body and glasses; rubbish tray is strongly recommended to clean up frequently so that there is no
1. Repeat the above “Quick cleaning procedure” until it’s relatively clean.
2. Switch off the machine and wait for the popping pot become cold. Clean the inside and
-
recommended to clean the kettle after using 3 to 4 times.
Switch OFF (II & III). Pour 300 to 500 ml of water (NO detergent is necessary) into inner pot.
To avoid burning excess amount of sugar from bottom of the inner pot , it is strongly
outside of the kettle by brush and wet towel. (NEVER immerse the kettle into water.)
-5