USDA Certification

Report No. 130815042GZU-001
IMPERIAL INDUSTRIAL SUPPLY
Page 11 of 26
Issued: 23-Dec-2013
Revised: None
Photo # Item no.
4 13
A
Frequency:
Annual
1 final
unit
Dielectric Strength
Apply voltage Between Test Voltage Test Time
winding to core
Test Name Test Parameters
Winding resistance
The DC resistance of stator winding at 25 degree ambient temperature
measured 36 +/-10% Ohm.
1000Vac
Rotor Various Cast Aluminium O.D Ф30 mm, by 18 mm long.
VERIFICATION PROCESS
Test Site:
CEC
Number of samples to test:
60 seconds
Insulation Tape
SUZHOU
MAILADUONA
ELECTRIC
MATERIAL CO
LTD
JY312(#)
Polyethylene terephthalate film tape, rated 130
℃, natural color. Completely wrapped the stator
winding.
Rotor Bracket Various
Aluminium
material
Two provided. Minimum 2.0 mm thick, Fixed
together to stator lamination by two screws and
nuts.
Stator Winding
ZHEJIANG
HONGBO
ELECTRIC LINE &
WIRE CO LTD
QZ-*/130
Coat type polyurethane. Rated 130℃. Sized Φ
0.27 mm. The DC resistance of stator winding
at 25 degree ambient temperature measured 36
+/-10%Ohm.
Bobbin
FOSHAN NANHAI
POLMA
ENGINEERING
PLASTICS CO
LTD
FG-3350
PA66 material. Rated V-0, 100℃, all color.
Minimum 1.2 mm thick. Tightly secured on the
stator lamination. The stator winding wound on
it. Refer to Illustration 4 for detailed dimensions.
MATERIALS LIST
(refer to illustration 4 for assembly drawing)
Component Manufacturer Type/model Dimensions/thickness/assembly information
Stator Lamination Various Silicon Steel
0.5 mm thick every sheet. Refer to Illustration 4
for details.
5.0 Critical Unlisted CEC Components
Thermal Protector
AUPO
ELECTRONICS
LTD
A4-F
Rated 250V, 2A, 130℃. The two terminals
covered by recognized insulating tube, and then
wrapped by Insulation Tape.
Motor Assembly
Name Manufacturer/Trademark
ZHUOGAO MOTOR
MANUFACTURING CO.,
LTD
YJ61-16E
Type / model
Shade-pole Motor
Component Standard used: Tested with appliance.
Electrical Rating: 120V, 60Hz, 21W Insulation class
ED 16.3.15 (1-Jan-13) Mandatory