Use and Care Manual

Assembling Parts
C. Popcorn scoop x 1 pc D. Kernel scoop + Oil scoop set
Assemble the kettle (B) on the supporters which
are built into the main unit (A), and connect the
Assembling Procedures:
. Use bolts & washers (Package B) provided to connect the Long stand (F) and the 2 pcs
square pole (E) together.
. Connect the completed above (1) with the short stand (G) by the bolts & washers
(Package B).
wheels (J) and then fix it with round cap nuts by wrenches provided (Package D).
of the short and long stand into the bottom of (H) and then fix by bolts in (Package B).
. Turn the complete unit back to up-right position. Install the handrail (D) onto the left hand
& the working platform (C) on the right hand by bolts & nuts with washers included in
(Package A).
. Place the main unit (A) onto the topside of
(Caution: Roller bar should be on the
door side and also check if gears between
pot and ceiling are perfectly matched).
. Open the door of the storage cabinet
the storage base.
-3-
-4-
. Turn the storage cabinet (K) up side down for convenient assembling. Insert both ends
. Insert axle (H) into short stand. Place sleeves and washers (Package C) onto each side of
Main unit x 1 pc B. Kettle x 1 pc A.
. Hook up the Kettle (B) onto the hanger.
CART MODEL ONLY
TABLETOP AND CART MODEL
cord from the unit to the socket in the ceiling.
the storage cabinet.
. Connect the power plug from the kettle
to the socket in the ceiling.
and release the spring shafts beneath
the main unit in order to fix the unit to
Note: Main unit alone can be used as a counter top
for stand-alone operation.